The load is too small. The electronic modules could not assess the residual moisture correctly.
In future, use a timed drying programme or dry individual items using theĀ Warm air programme.
Support for yourWasher Dryer
Laundry too damp after drying
The laundry is still too damp after being dried in the washer-dryer. The message Check load appears on the display.
During the spin cycle, the laundry formed a ring in the drum because the laundry was distributed unevenly.
Open the door and loosen the laundry.
Select a lower spin speed.
Start the drying programme again.
The Pre-ironing Extra (if available) was selected.
Unload the laundry and place it on hangers to finish drying.
Warm laundry can feel damp.
Spread the laundry out to cool it down.
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
