The fuse has tripped.
Reset the circuit breaker (see data plate for minimum protection rating).
Support for yourHob
Induction hob not responding
The induction hob no longer responds to the controls.
The system lock or safety lock is activated.
Deactivate the system lock/safety lock as described in the operating instructions.
There is a technical fault.
Disconnect the appliance from the mains power supply for approx. 1 minute.
Switch off the relevant circuit breaker. Or remove the fine-wire fuse completely. Or switch off the residual current device.
Switch the circuit breaker back on.
Hob with touch display:
Your fingertips are covered.
Touch the touch display with bare fingers only.
Wipe protection has been activated.
Deactivate the wipe protection.
You touched the touch display whilst holding an item of cookware.
Only touch the touch display when both of your hands are free.
The touch display is dirty.
Remove any soiling.
Additional media
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
